iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&AAirport Diagram TransitionAirport Diagram Transition
Previous
 
Next
New Post
4/28/2013 1:30 PM
 
citabriabob
10th Level Poster


Joined: 4/14/2010
Posts: 156
I thought I saw this discussed before, but Search did not find it, so:

(Latest update on 720) After takeoff, the screen shifts from Airport Diagram to a chart, but it goes to (I think) the Vector mode, not back to the Sectional mode used previously. When I manually change to Sectional mode, it comes up at an extreme zoom, so I have to manually zoom out; this is not the right time in flight to do this...

I upgraded from the 700 to the 720 at Sun 'n Fun and have to say this is a much-improved screen. Overall another great product from a great company.
Robert Szego
Bellanca-Champion Club http://www.bellanca-championclub.com
Aeronca Aviators Club http://www.aeronca.org
 
New Post
4/28/2013 4:41 PM
 
Joe
No Ranking


Joe's Avatar

Joined: 6/7/2012
Posts: 7

Hi , I too have had the same problem and i believe they are working on the problem

Joe
 
New Post
4/28/2013 4:56 PM
 
Jonathan
No Ranking


Joined: 4/11/2013
Posts: 40

http://ifly.adventurepilot.com/SUPPORT/Forum/tabid/108/forumid/6/threadid/10009/scope/posts/Default.aspx

It was my post, and yes, they are working on it
 
New Post
4/28/2013 7:06 PM
 
PA-22
6th Level Poster


PA-22's Avatar

PA-22's Avatar

Joined: 2/16/2011
Posts: 501
I have reported that I have found that sometimes it works the way you would expect and takes you back to the map mode previously selected, but sometimes it does not. I am not sure just what causes this, but it seems to depend on how you got into RealView to begin with - I find it works OK if I start out in Sectional or TAC map mode and use AutoTaxi. It always gives me the correct map when my speed exceeds 35 kts and visa-versa. However I, too, have noticed that it has reverted to Vector mode at other times, but I cannot figure out what the pattern is: whether I got to the photo by tapping the runway diagram on the airport info page, or via an airport context menu, or if it only happens when a specific sequence is performed. It really is a great feature. ==== Ralph.
 
New Post
4/28/2013 9:44 PM
 
Walter
1st Level Poster


Walter's Avatar

Walter's Avatar

Joined: 7/8/2009
Posts: 2778
This is how to recreate the problem: View a plate or airport diagram, click the "Back" button to return to the map. Then view a Real View image, click the "Back" button to return to the map. Now the plate or diagram you had accessed prior to the RealView image will not display.

This is fixed in code, should have this through testing in a few days.

-Walter
Walter Boyd
President, Adventure Pilot
 
 Page 1 of 2
12Next 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&AAirport Diagram TransitionAirport Diagram Transition


Adventure Pilot LLC

1476 Industrial Blvd McKinney, TX 75069
info@iflyefb.com
M-F: 10:00am - 5:00pm CT
(214) 585-0444

© 2023 by Adventure Pilot : Terms Of Use : Privacy Statement