iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&AVersion 7.6.5 features guidanceVersion 7.6.5 features guidance
Previous
 
Next
New Post
4/14/2013 5:41 AM
 

It's about 12600 photos at nearly 1.8 gig. They should all fit, but you can also select the states you want. If you run out of room, it will prompt you with options to delete, examples (Alaska, Southwest, NorthEast, IFR Data, etc). You can always add things back later if needed for a special trip, most delete Alaska if they. Don't have plans to visit, that is a huge amount of data. Hope this helped.


Shane Woodson
Vice President | Adventure Pilot LLC.
 
New Post
4/14/2013 11:30 AM
 

I just downloaded 7.6.5, put in iFly, then back to PC and redownloaded. NO photos were portrayed to be selected. Is this a 720 option only? Exploring the SD card showed lots of photos but none that looked like airport photos I have a 700, still. The menu does have the option checked for taxi charts, I just do not have the "real" photos. My SD is 16g and has about 4g on it now. Maybe they are there, and I need to be at an airport that has a real photo?

It is cool to see I am on the approch plate 7 miles from T74. No airport diagram for it. I tried KAUS showing no real photos. I am too far away to see my airplan on its airport diagram.


Mooney M20E
 
New Post
4/14/2013 4:37 PM
 
Mark Stefanov wrote:

NO photos were portrayed to be selected. Is this a 720 option only?

Yes, it's for the 720, which I believe is a dual processor.


Zodiac 601HDS N6402X aprs KF7WIR-1
 
New Post
4/15/2013 1:57 PM
 

OK -- using IFly connect ---- for the SD card --- the update menu I get does not include an option to select the photos --- just the usual plates and charts ---- tried a couple of times.

What am I doing wrong?

 
New Post
4/15/2013 3:40 PM
 
RONSIM wrote:

OK -- using IFly connect ---- for the SD card --- the update menu I get does not include an option to select the photos --- just the usual plates and charts ---- tried a couple of times.

What am I doing wrong?

Ron: There is a new version of iFly Connect which you should be prompted to download and install. This new version is needed to see the Airport Photo selections. With this latest iFly Connect running on your PC, here are the steps I use.

1. FIRST, using iFly Connect download only the software update, version 7.6.xx, to your SD card.

2. Close out the iFly Connect application on your PC - in fact, I even eject the SD card from the PC then re-insert it again in the PC.

3. THEN launch iFly Connect again. Now when it seesYou should see among the list of options to choose, the Airport Photos. It is really pretty simple once you do it. ==== Ralph
 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&AVersion 7.6.5 features guidanceVersion 7.6.5 features guidance