iFly700 GPS interface with Century 1 Autopilot

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly Owners Q&A

iFly700 GPS interface with Century 1 Autopilot

9/9/2012 5:12 PM

Sara Romanish

Joined: 5/1/2012

Posts: 2

iFly700 GPS interface with Century 1 Autopilot

In the owners manual Page 37 is the pin out for the GPS outputs Pin 3 for data and Pin 5 for ground. The Century 1 has 2 inputs from the OPB Left and Right output. Can anyone tell me if the Pin 3 and 5 would be the same as Left and Right?

9/15/2012 10:57 AM

flightlead404

Joined: 4/2/2012

Posts: 5

Re: iFly700 GPS interface with Century 1 Autopilot

No it is not.

The GPS outputs basically serial digital data. The C1 is a +/- 150mv analog differential input.

You need a Smart Coupler from Porcine. I think they are still around. Or an experimental airplane into which you can put a better autopilot.

Page 1 of 1

Home

Discussions

iFly Owners Q&A

iFly700 GPS interface with Century 1 Autopilot

iFly GPS Forum

Adventure Pilot LLC