HERE are some of what the pages LOOK LIKE when trying to rectify this problem of "The Leans" with your AHRS in STRATUX.
Menu status page....
In AHRS, get to this page and hit the LEVEL button...
Should STAY level after the RESET / LEVEL, but...mine did not, which is why I had to go to the "Calibrate" button that Tim and Cobra pointed me to - thanks again!
See below "Calibrate GYROS" -- that was the EASY BUTTON to fix my issue!
BOOM - it's DONE.
You can also mess with this reset as well....the G METER. Not a big factor in my 1977 Cessna 150! But some of yinz are out there in aerobats! My only G readigns today were from TURBULENCE or CARRIER LANDINGS.
In the end, it ought to look like THIS before take-off....
And look like THIS in the AIR while flying...
GOOD LUCK!
Mike N714AJ