iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Wish-ListiFly Wish-ListFast access to brightness in Plates modeFast access to brightness in Plates mode
Previous
 
Next
New Post
11/6/2012 11:28 AM
 

It would be nice to have a single push button to change day/night mode in Plate Mode. On top you need day, descending through overcast you could need night mode to keep the distraction down.

 
New Post
11/6/2012 2:04 PM
 

Good point, I'll make sure that is on the list. We just have to be very careful that we don't clutter the screen with to many buttons. We are looking at some ideas to reduce/select what buttons would be shown. Maybe like a Favorites Button.

Don't forget, you can quickly reduce the brightness with the remote as well. Full Night Mode, even in IMC would likely be too dark. Night Mode was really preset for true Night or very dark conditions. Just some thoughts here. Thanks again for the feedback.


Shane Woodson
Vice President | Adventure Pilot LLC.
 
New Post
11/6/2012 7:13 PM
 

I would be a fan of being able to configure which buttons are on the screen - similar to how the instruments are set up. That way we could all configure the options that we need depending on what type of flying we do......

 
New Post
11/7/2012 1:08 AM
 
don wrote:

I would be a fan of being able to configure which buttons are on the screen - similar to how the instruments are set up. That way we could all configure the options that we need depending on what type of flying we do......

I second that motion.

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Wish-ListiFly Wish-ListFast access to brightness in Plates modeFast access to brightness in Plates mode