iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&ANavworx ADS600-expNavworx ADS600-exp
Previous
 
Next
New Post
2/25/2015 11:04 AM
 
henrysamson
No Ranking


Joined: 5/15/2012
Posts: 17
I use my Ifly in my homebuilt and it is coupled to a Dynon EFIS. Works great! As we all know there is a 2020 deadline looming on the installation of ADS-B out. Seems that Navworx has a UAT that is now fully certified and meets the 2020 requirement for experimental aircraft and is fairly cheap (about $1000 with antennas and cables). I'm curious to know it the ADS-B in for this unit is compatible with the iFly 720.

Thanks!

Hank
 
New Post
2/25/2015 11:55 AM
 
Jim Brown
9th Level Poster


Jim Brown's Avatar

Joined: 11/16/2010
Posts: 268
Hank,
Which Dynon model are you using? I'm building a Van's RV-12 with the current Dynon Skyview that will have a wifi module. I'm hoping my iFly 720 will interact effectively with it. Is this similar to your plane's equipment?

Jim Brown
 
New Post
2/25/2015 1:09 PM
 
henrysamson
No Ranking


Joined: 5/15/2012
Posts: 17
Hi Jim,

I have the 10A, the smallest one they make. I couple it through the usb plug on the iFly which then goes into a usb to rs232 converter (which iFly sells) and then into the Dynon. It is a one wire connection that passes the streaming NMEA output from the iFly to the Dynon. Works great. Since I have the OAT sensor and remote mag compass for the Dynon it also gives me a wind vector. Not sure how you would do it with the Skyview.

Hank
 
New Post
2/25/2015 1:54 PM
 
Jim Brown
9th Level Poster


Jim Brown's Avatar

Joined: 11/16/2010
Posts: 268
Hank,
I've heard of another pilot who connected his ifly 720 to a Dynon via the add-on wifi for his Dynon. I was hoping that you were doing the same thing.

Thanks,
Jim
 
 Page 1 of 1
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly Owners Q&AiFly Owners Q&ANavworx ADS600-expNavworx ADS600-exp


Adventure Pilot LLC

1476 Industrial Blvd McKinney, TX 75069
info@iflyefb.com
M-F: 10:00am - 5:00pm CT
(214) 585-0444

© 2023 by Adventure Pilot : Terms Of Use : Privacy Statement