Screen sensitivity using ADSB for traffic

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly Owners Q&A

Screen sensitivity using ADSB for traffic

7/10/2018 8:22 PM

Jeff Clark

Joined: 9/20/2012

Posts: 1254

Re: Screen sensitivity using ADSB for traffic

you're running on a tablet, correct? as in Android/Apple? This is the iFly Owner's" forum, as in iFly 700, 720,740, etc. hardware. The iFly hardware has a different setup than the iFly app that runs on Android, Windows, and Apple hardware, so you might want to move your question to one of the other forums. Desert Flyer's correct answer will only work on the iFly dedicated hardware.

Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS

7/10/2018 8:24 PM

Jeff Clark

Joined: 9/20/2012

Posts: 1254

Re: Screen sensitivity using ADSB for traffic

You're running iFly GPS on a tablet, correct? as in Android/Apple? This is the iFly Owner's" forum, as in iFly 700, 720,740, etc. hardware. The iFly hardware has a different setup than the iFly app that runs on Android, Windows, and Apple hardware, so you might want to move your question to one of the other forums. Desert Flyer's correct answer will only work on the iFly dedicated hardware.

Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS

7/10/2018 10:11 PM

Mike D.

Joined: 1/15/2010

Posts: 1213

Re: Screen sensitivity using ADSB for traffic

If you ARE using an iFly device 700/720/740 etc. You need to exit out of the program. Menu>Exit Application>Either shutdown, or Run in Background. Then access the re-calibrate through the Windows CE menu now displayed as previously instructed.

7/15/2018 7:20 PM

Michael Marra

Joined: 3/26/2014

Posts: 706

Re: Screen sensitivity using ADSB for traffic

Thank you Jeff and Mike. Appreciate your advice and time to address this minor, yet nagging issue I am having. It is still unresolved.

I am running Ifly and STRATUX off an Android tablet and not an IFly hardware product, just the APP.

The ONLY thing that has changed for me is the screen saver...I went to one of those that is supposed to be better for GLARE. Not sure if THAT is the culprit but that's the only thing I know of that changed.

I still cannot find any command on the APP that will reset this feature....my only recourse seems to be to remove the $25 screen saver and SEE if that is the difference...

Otherwise, I know of no other "re-set" to do in order to again receive data on moving ADBS targets...any ideas?

(Sorry for the delayed response as I was out of town and away from electronics)

Thank you, Mike N714AJ