About 1 in 10 times I power up the IFly 720 and the Navworx 600EXP I will get blanks in the STATUS block and find that the " devise is not connected" a quick look in the " about " will show NAvWorX not connected. ie no heartbeats. I've tried the reboot button there on the IFly but can say that it has never worked to re connect. About the only thing that will work is to pull power plug on the I fly and wait 30 seconds and then repower, It will usually load back up as it should normally with wifi connected.
Anyone else had issues with the wifi not connecting about 10% of the time? Anyone had any luck with the reset button which was added in sofware not to long ago working to attempt a reconnect and being sucessfull with that reconnect , short of repower the entire unit.
My Ifly powers up with the master switch and the ADSB unit is usually switched on immediately ( even before engine is cranked.) It seems that if the IFly gets to NAV screen before the ADSB unit get "warmed up" that the IFly will never recognize there is a devise out there to connect with.
Any comments ?