iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsADS-B Discussio...ADS-B Discussio...Trouble connecting to StratuxTrouble connecting to Stratux
Previous
 
Next
New Post
9/2/2021 9:23 PM
 
Bob Baggerman
No Ranking


Bob Baggerman's Avatar

Joined: 6/10/2019
Posts: 9

I've been using iFlyGPS for a year but have just now decided to connect it to ADS-B in. I have put together a Stratux box for this. Everything is stock out of the box. I don't have the GPS or the AHRS boards, only the two USB software defined radios. The Stratux box seems to be working fine. I can connect my tablet to it via wifi, open the web browser, and see and use Stratux via the web interface. But when I try to get iFlyGPS to connect to Stratux using the same tablet I don't get a connection. The "ADSB Status" pages just says "Waiting for Device". Is there some sort of magic I am missing? iFlyGPS is version 11.1.26 and Stratux is version 1.6r1-eu025.

Any advice would be appreciated.

Bob
 
New Post
9/2/2021 10:50 PM
 
Cobra
1st Level Poster


Cobra's Avatar

Cobra's Avatar

Joined: 4/20/2011
Posts: 2602

From that ADSB status window, click "Options" and then "Change Selected Device".  Is it currently set to AUTO-DETECT?  If so, try changing it to Stratux/Flightbox and see if there's any change.  (And if it's set to Stratux/Flightbox, try changing it to AUTO-DETECT.)

You said you were able to log into the Stratux web interface, so I think this question is already answered, but just to be sure--confirm the tablet is connected to the Stratux's wifi before you launch iFly?

Without a GPS or AHRS onboard, and likely without a connection to any ADSB ground towers if you're trying to test this connection from home, the Stratux probably doesn't have any data to send to iFly.  I'm not sure if that makes any difference in how iFly reports whether it's connected or not.
 
New Post
9/3/2021 8:49 AM
 
Bob Baggerman
No Ranking


Bob Baggerman's Avatar

Joined: 6/10/2019
Posts: 9

I have tried both AUTO-DETECT and Stratux/FlightBox. Same with both.

Yep, the tablet is connected via WiFi to the Stratux box.

As for data, the iFlyGPS status screen says it is looking for a heartbeat. I would suspect that would be available all the time. I am also receiving targets over the 1090 receiver. So there is data available. I can see it on the Stratux web interface.

Any chance the Stratux API changed? Anyone else using Stratux 1.6r1-eu025 (the latest from Dec 2020)?

Bob
 
New Post
9/3/2021 11:04 AM
 
Brolin McKay
4th Level Poster


Joined: 10/6/2019
Posts: 772

There are some hardline stratux guys on here but I'll tell you it's 99% going to be an issue with stratux. I don't recommend them at all. Might be a fun thing to do around the house if you want to have a raspberry pi but absolutely not something i would have in the cockpit. We offer the far superior AstroLink by Levil that I personally fly with.
 
New Post
9/3/2021 11:24 AM
 
Bob Baggerman
No Ranking


Bob Baggerman's Avatar

Joined: 6/10/2019
Posts: 9

I just tried this with iFlyGPS on my iPhone. It seems to work just fine on my iPhone. That kinda points back to something quirky about your Android version. Unfortunately I use my tablet for flying. FWIW, iFlyGPS is version 11.1.26 on my Galaxy tablet and version 11.1.25 on my iPhone.
 
 Page 1 of 3
123Next 
Previous
 
Next
HomeHomeDiscussionsDiscussionsADS-B Discussio...ADS-B Discussio...Trouble connecting to StratuxTrouble connecting to Stratux


Adventure Pilot LLC

1476 Industrial Blvd McKinney, TX 75069
info@iflyefb.com
M-F: 10:00am - 5:00pm CT
(214) 585-0444

© 2023 by Adventure Pilot : Terms Of Use : Privacy Statement