Stratux Vertical problem - iFly General Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly General Di...

Stratux Vertical problem

4/2/2018 7:51 PM

JohnnyBlackCT

Joined: 12/31/2017

Posts: 161

Re: Stratux Vertical problem

DO NOT type in 192.168.10.1 until you have connected your computer or tablet to your Stratux WIFI. First, turn off you iFly device. Second, turn on your Stratux and give it time to boot up. Third, open your computer or tablet WIFI and find the Stratux network. Forth, connect the computer or tablet to the Stratux network. After it is connected, open your browser on the connected computer or tablet and type 192.168.10.1 and press enter.

4/3/2018 4:53 AM

Mark Kolber

Joined: 9/30/2014

Posts: 224

Re: Stratux Vertical problem

cessna1 wrote:

Thanks but " No Joy'

Cannot access 192.168.10.1 only been able to find out not IP address but belongs to private network. "only to be used inside local area networks.

I see on you tube videos how to reconfigure just cannot get there on cell phone or Samsung tablet.

Johnny is giving good step by step advice, but this may help you understand. When Stratux is selected as your WiFi network, it is your "local area network."

While the Stratux box is on, go to WiFi settings on your Samsung tablet (I have one too; works just fine) and select Stratux. Make sure it is connected, then go to your browser and type 192.168.10.1.

4/4/2018 6:25 PM

cessna1

Joined: 9/29/2010

Posts: 13

Re: Stratux Vertical problem

Thanks guys.

Working great !

5/21/2018 3:39 PM

cessna1

Joined: 9/29/2010

Posts: 13

Re: Stratux Vertical problem

Worked great for one flight. Last severaal flights 720 would not pick up any signal from Stratux. Shows "not connected" I flew this weekend with friend using Statux on I pad and worked going to Ms from NC , but on return flight did not work. Green and red lights are working.

Are others having this problem ?

5/21/2018 7:45 PM

Cobra

Joined: 4/20/2011

Posts: 2602

Re: Stratux Vertical problem

Did you confirm that your tablet was actually on the Stratux network? I've been surprised before when I landed at an FBO that had an "Xfinity-wifi" hotspot and my tablet auto-connected to it instead of the Stratux the next time I powered up.

You can do some basic troubleshooting within the iFly app by choosing Menu > About > Connected Devices. That page will give you confirmation that iFly is connected to your Stratux or not.

if it is connected, I think an "advanced" button pops up that gives you some lower-level details about the data it's receiving. Some of those numbers will be incrementing as new data comes in, so you can confirm that data is or is not actually coming in to iFly.

Page 2 of 4

Stratux Vertical problem

iFly GPS Forum

Adventure Pilot LLC