Stratux Vertical problem - iFly General Discussions - iFly EFB

iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Stratux Vertical problemStratux Vertical problem
Previous
 
Next
New Post
3/29/2018 5:01 PM
 

Stratux is great. Better than my Garmin GDL 39 / Garmin 696 combo.. Problem is cannot get AHRS to reset when Stratux mounted vertically. ( Ifly 720)

Suggestions ?

 
New Post
3/29/2018 5:27 PM
 

The Stratux needs to be re-calibrated to the new, vertical position via its own website (192.168.10.1).  After it knows its new "level", the iFly device can use it again.  You'll need to re-calibrate the Stratux each time you change its orientation.


Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS
 
New Post
4/2/2018 4:10 PM
 

Thanks but " No Joy'

Cannot access 192.168.10.1  only been able to find out not IP address but belongs to private network. "only to be used inside local area networks.

I see on you tube videos how to reconfigure just cannot get there on cell phone or Samsung tablet.

 

 
New Post
4/2/2018 4:28 PM
 

First, turn on your Stratux.  Then, connect your computer or tablet to the Stratux network via WIFI.  Then, open the browser on your connected computer or tablet.  Then, type in 192.168.10.1 and press enter.  That will take you to the Stratux program Menu when you will find 4 separate pages and what you need.

 
New Post
4/2/2018 7:32 PM
 

Still "No Joy"

Stratux is talking to 720 but neither tablet or phone , after input of 192.168.10.1  , picks up "stratux" on scan.

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Stratux Vertical problemStratux Vertical problem