iFly GPS Forum

We have a new Forum!  Go here to get started: https://adventurepilot.community.forum.  
The new forum is easier to use and much more capable than the old, we hope you will join our community! 

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Multiple connections to 740Multiple connections to 740
Previous
 
Next
New Post
4/15/2017 11:50 AM
 

I need/want to connect the ping ads-b to my 740 as well as out put to my Dynon D180. I have the usb to serial adapter in place now for the D180. Do I need a usb multi connecter to add the Ping? Or something else?

 
New Post
4/19/2017 10:07 PM
 

We typically advise folks to use that port for just one purpose. We've had issues in the past trying to support a USB splitter, with one port being used for output and the other for input.  


Walter Boyd
President, Adventure Pilot
 
New Post
5/2/2017 1:38 PM
 

OK, how about using two usb to serial cords and feeding the ping output into the 740 input pin with the output pin going to the D180?

 
New Post
5/5/2017 9:06 AM
 

 Just curious,  what info is the  740  or maybe Ping Buddy able to  communicate with  thru the Dynon 180.  I also have both (  atlthough 720)  and have not been  able to find many things that will communicate with the D180, it being rather  older electronics  by todays  standards.  Thanks

 
New Post
5/15/2017 9:07 AM
 

It is primarley for the nav. info on the D180. I had an old lowrance connected and it would show cross wind compenent.

other than that, not much.

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsiFly General Di...iFly General Di...Multiple connections to 740Multiple connections to 740