Adding User Defined Areas - iFly General Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly General Di...

Adding User Defined Areas

3/26/2011 3:53 PM

Bill

Joined: 2/11/2011

Posts: 37

Re: Adding User Defined Areas Modified By Bill on 3/26/2011 3:55:05 PM

Thank you for the TFR string parsing information. It was spot on.

Here is a screen shot of "My Box". I flew it this morning and it was too easy staying legal while flying up side down using the highest zoom level.

http://www.lolachampcar.com/images/IF...

This was an earlier version. I have since modified the two sides bound by Gwin and F45 class E to be arcs.

Thanks again for all the help. Bill

4/1/2011 3:36 PM

Chris in Marshfield

Joined: 8/2/2010

Posts: 17

Re: Adding User Defined Areas

Wow, those are my old stomping grounds! I grew up just down the road from PBI on Belvedere Road. I used to go to the airport all the time and hang out at the terminal (when you used to be allowed in those things) and watch the airplanes. Used to fly the C.A.P. C-152 out of Palm Beach Aviation with my instructor (I was 15 at the time). Is that place still there? Good times :-)

~Chris

Page 2 of 2

Adding User Defined Areas

iFly GPS Forum

Adventure Pilot LLC