I'm curious if everyone seeing this is on a Sectional chart. I'd be surprised if you saw this same discrepancy on Vector Mode. Sectional are for VFR reference and many times while show the airport, obstruction or airspace slightly off from the extract Lat/Long. And this Sectional vs Actual discrepancy various from chart to chart.
For instance, have you ever planned a flight to another airport and noticed the iFly rendered the "waypoint" slightly off center from the airport location on the sectional. If you then switch to Vector Mode, you'll see it's spot on the airport. The FAA has a tolerance for the placement of things on VFR Sectionals. TAC and IFR charts are more precise as they should be.
I'd be interested for someone to make that same flight or test and flip from Sectional to Vector to see if there is a discrepancy between modes. Vector Mode is rendering airports, towers, airspaces precisely based on the FAA's database.
If someone will report back their findings, I've personally seen this on many sectional charts... My waypoint or position over the sectional being slight off, up to a mile in cases. That's why I use Vector Mode more around critical airspaces. I hope this helps.