iFly Connect Installation Instructions

With iFly Connect, updating your iFly GPS is easier than ever. If you have a Windows based PC and an SD card reader, you are ready to get started.

1 Unplug your iFly GPS and eject the SD card 

This is the postage-sized memory chip on the left side of the iFly, to eject it gently push it in and release, it will pop out. 

2 Insert the SD card into your PC

If your PC doesn't have an SD reader, you can buy these from Amazon or Walmart. Look for a USB to SD card reader.

3 Install iFly Connect 

Please click on the "iFly Connect Installer.exe" in orange text on the right side of this menu:

4 Run the Installer

Run the iFly Connect installer.exe file. This should be in your Downloads folder. Follow the prompts in the installer. After the install is complete, iFly Connect will run.

5 Finished

Now, select the necessary states and files you require for your update! In the future, iFly Connect can be run from the Desktop Shortcut, or from the Start Menu by searching for "iFly Connect"