Shutting Down STRATUX ADSB IN with the IFLY Exit command

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly Owners Q&A

Shutting Down STRATUX ADSB IN with the IFLY Exit command

4/19/2019 1:44 AM

Kevin Lawrence

Joined: 3/27/2014

Posts: 1

Re: Shutting Down STRATUX ADSB IN with the IFLY Exit command

When you hit shut down stratux if you can see the stratux box the green light will blink several time then turn back solid completing the shut down of stratux.

5/12/2019 8:17 PM

Michael Marra

Joined: 3/26/2014

Posts: 706

Re: Shutting Down STRATUX ADSB IN with the IFLY Exit command Modified By Michael Marra on 5/12/2019 8:17:35 PM

Kevin Lawrence wrote:

When you hit shut down stratux if you can see the stratux box the green light will blink several time then turn back solid completing the shut down of stratux.

Kevin, Yes - thanks! This is the last thing I do AFTER engine shutdown and running my after landing/engine shutdown checklist.

Since I have been shutting down using this procedure, my STRATUX has been working fine for the last 6 months or so...no issues and no corruption.

I am now leaving my STRATUX in the aircraft and only take the battery with me to recharge...less wear and tear on the device and antennas...seems to be working well for me.

Mike N714AJ

Page 4 of 4

Shutting Down STRATUX ADSB IN with the IFLY Exit command

iFly GPS Forum

Adventure Pilot LLC