EFIS and ADS-B - iFly General Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly General Di...

EFIS and ADS-B

8/2/2012 4:46 PM

henrysamson

Joined: 5/15/2012

Posts: 17

EFIS and ADS-B Modified By henrysamson on 8/2/2012 4:48:19 PM

So, I have my iFly coupled to my Dynon EFIS using the USB port with a RS232 converter. Can I also have ADS-B data? The data from the iFly to the EFIS is wired to pin 3 on the RS232, can the data from the ADS-B to the iFly be wired to pin 2?

Thanks!

8/4/2012 7:39 AM

Jon

Joined: 4/12/2012

Posts: 87

Re: EFIS and ADS-B

With the USB port supporting host mode is it possible to use a USB hub? Can you then have more then one serial cable using a hub?

Page 1 of 1

iFly GPS Forum

Adventure Pilot LLC