Raspberry Pi ADSB-IN - iFly General Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly General Di...

Raspberry Pi ADSB-IN

10/30/2015 2:08 PM

Joined: 1/1/0001

Posts: 0

Re: Raspberry Pi ADSB-IN

Thanks, but I'm looking for a battery powered option.

10/30/2015 5:47 PM

Jeff Clark

Joined: 9/20/2012

Posts: 1254

Re: Raspberry Pi ADSB-IN Modified By Jeff Clark on 10/30/2015 5:48:21 PM

Also be aware that your cable may be insufficient. It's been mentioned in other forums, and my personal experience is that ONE out of about 10 cables I have around the house can provide enough juice between the power source and the Pi on my dual radio/AHRS build.

Jeff Nokomis Clark, Mooney M20G, iFly app on ASUS ZenPad Z8s, ASUS ZenFone AR, ASUS Windows 10 tablet, Stratux ADS-B w AHRS

11/2/2015 6:57 PM

Kent Shaw

Joined: 11/20/2011

Posts: 30

Re: Raspberry Pi ADSB-IN

I have compiled a guide on putting one of these together with parts list, building steps, configuration, and operational testing. Mine used the compact three piece case. There are several pictures. I have not yet added steps for IFly testing and plan to add a few more pictures on wiring the GPS/AHRS chip. It is too large to post here (4.8 megabytes) but if anyone wants one, just ask.