|
|
|
One clarification - The Wifi uses a USB connector, but only for the physical aspect of the connection – it is not using USB standards as the electrical interface. The RS-232 Display port connects to the Wifi.
Call NavWorx and ask for Bethany. She can answer most questions on the install. Mine came with a 2 or 3 page install and set-up sheet that showed how to hook up the Wi-Fi dongle. My original Dongle only supported one device using a static IP. Their new dongle supports DHCP and multiple devices. They upgraded mine to the new one, which connects the same. I have that sheet out at the hanger. I checked with them today and there is a new SW version for the 600-B, 4.0.7. Beth sent it to me and I will be loading that tomorrow.
|
|
|
|
 | |
|
|
 |
 |
Joined: 3/19/2015
Posts: 34
|
|
|
Rich,
Thanks for the info. I was wondering how the USB and RS-232 standards were working together. That makes more sense now. I'll get a hold of them tomorrow on the phone and see if they can email me a copy of the pinouts for the WiFi. If you still want a copy of the install manual let me know.
Thanks,
Mike
|
|
|
|
| |
|
|
|
|
Joined: 3/19/2015
Posts: 34
|
|
|
Rich,
Got a reply back from Bill. He sent me an older manual: 240-0008-00-36 dated 3-17-15 and said this would be updated on the website tomorrow.
It includes the WiFi interconnect instructions.
Thanks for the help,
Mike
|
|
|
|