I'm trying..., of course to state the obvious - it's when there is weather that I need the autopilot ;-)
I would like to at least get back to where I was on 6.0.8 which was actually having the choice of one or the other. The following summarizes experience (Sky Radar completely removed only Serial connector to Dynon connected):
To recap -
> 6.0.8 - NMEA worked perfectly (original AP serial to USB cable - Pin 2 removed);
>Upgrade to 6.5.6 (same settings & cable) - NMEA became intermittent;
>>Upgrade to 6.5.9 beta (same settings & cable) - NMEA lost entirely;
Additional update - Followed "smokes" posting (as indicated above) and tried it again tonight with just the "specific" Dynon required GPS sentences. Still nothing.. (However I believe he is running a 720, but I figured worth a try as he too lost NMEA on 6.5.6. to 6.5.9 upgrade). I tried this with and without the "prolific drivers - rebooted each time); Seems like the NMEA "fixes" made to get the 720 to work may have broken the same for the 700?
I loved the Dynon/Autopilot and iFly combination as it worked well on 6.0.8. I bought the SkyRadar based on your input that the USB hub would work. Regarless, lets put that aside - I'm willing to be patient to get both working, I know and trust AP will get it figured out in time. In the mean time I would like to get back to where I left off on 6.0.8 and get my EFIS working again (with the SkyRadar unplugged). Is there somewhere I can download 6.0.8?
BTW - I can't imagine any other GPS company where I'd be getting to have a direct discussion like this. I remain 100% dedicated to my support of the iFly and AP. Thanks for the continued amazing work.
Regards - Alasdair