Raspberry Pi ADSB-IN - iFly General Discussions

We have a new Forum! Go here to get started: https://adventurepilot.community.forum.
The new forum is easier to use and much more capable than the old, we hope you will join our community!

Below is a copy of the old forum. This will remain available for a short period so you can access and review the information contained here. To continue a conversation, or start a new one, please register and create a post at our new forum location.

Search

Home

Discussions

iFly General Di...

Raspberry Pi ADSB-IN

10/23/2015 5:02 PM

SkyPuppy

Joined: 3/21/2017

Posts: 282

Re: Raspberry Pi ADSB-IN

This is great stuff!!!

One question, though. Using the stratux on android, I have the traffic limits all at "unlimited" and the "web interface" is showing gobs of 1090 traffic but they NEVER show up anywhere on the iFly map. How do I get that to work, please? Is there something in iFly that I haven't turned on yet?

I know the iFly is seeing the stratux (with 2 radios input) because I can see the heartbeats when looking at the "device."

Thanks.

10/23/2015 5:20 PM

Joined: 1/1/0001

Posts: 0

Re: Raspberry Pi ADSB-IN Modified By on 10/23/2015 5:21:26 PM

Are you sure you used the correct software that supports both 978 and 1090 on your Stratux? Do you have an antenna plugged into both receivers?

10/23/2015 5:24 PM

SkyPuppy

Joined: 3/21/2017

Posts: 282

Re: Raspberry Pi ADSB-IN

Pretty sure, OldPilot. v4r4 and looks to me like 2 radios stuck into the powered USB hub. Thank you for playing.

10/23/2015 5:53 PM

Joined: 1/1/0001

Posts: 0

Re: Raspberry Pi ADSB-IN Modified By on 10/23/2015 7:11:27 PM

Do you need to do any configuration changes within the Raspberry software or do you simply plug in the second receiver? I have no idea but someone here knows, I'm sure.

10/23/2015 6:17 PM

SkyPuppy

Joined: 3/21/2017

Posts: 282

Re: Raspberry Pi ADSB-IN Modified By SkyPuppy on 10/23/2015 6:23:11 PM

The Raspberry, while running it's ads-b software, also makes a "web page" control interface available. Use the available address in your browser (default is 192.168.10.1 for the wifi connection) and it comes up. Click on the "settings" tab and one can see toggles for the radios to use. Then click on 'status' (I think) and it shows you how many UAT and/or 1090ES messages it is receiving.

Page 12 of 31

...11

...31

iFly GPS Forum

Adventure Pilot LLC